SeaLife Extended Warranty & Maintenance Program

Add one or two years to the original Sealife Limited Warranty, for a total two (2) or three (3) year warranty period from the date of purchase. To be eligible, you must register your product’s warranty extension before the initial one year warranty expires, e.g. if purchase date is March 1, 2026, extended warranty and maintenance begins on March 1, 2027. Annual maintenance outlined below is part of the program and recommended for optimal product performance. Return to the SeaLife Extended Warranty & Maintenance Program Order Page.

 

Annual Maintenance – SeaLife Camera

Complete factory inspection and test of your underwater camera. Includes the following:

  1. Operational depth test to 200ft in pressure tank
  2. Check for latest version components and update parts as needed
  3. Test camera operation
  4. Inspect that all included camera accessories are functioning
  5. Update camera firmware, if applicable
  6. Check battery condition charge and clean contacts
  7. Reset to factory default settings
  8. Detail cleaning of camera

Annual Maintenance – SeaLife SportDiver UW Housing

Complete factory inspection and test of your SportDiver housing. Includes the following:

1. Replace and lube main seal and vacuum check port O-ring
2. Depth test to rated depth in pressure tank
3. Check for latest version components and update parts as needed
4. Test housing operation
5. Inspect that all included housing accessories are functioning
6. Inspect and clean battery contacts
7. Detail cleaning of housing

Annual Maintenance – Light

Complete factory inspection and test of underwater Flash or Light. Includes the following:

1. Replace main O-ring(s)
2. Test switch and button operation and lube button/dial O-rings if needed
3. Depth test to rated depth in pressure tank
4. Check for latest version components
5. Check battery condition and clean contacts
6. Inspect light output brightness
7. Detail cleaning