Bright and powerful
The Sea Dragon 2500 uses flat panel COB LED technology to closely mimic natural sunlight, bringing out amazing colors in underwater photos and videos. With a Color Rendering Index of 90, the Sea Dragon 2500 solves the issue of blue underwater photos and videos by giving divers the ability to add light down to 200 feet/60 meters with portable sunlight.
An ultra wide beam
The incredibly wide 120-degree beam (90-degrees underwater) of the Sea Dragon 2500 ensures maximum lighting coverage and is ideal for cameras with a wide field of view, like the SeaLife Micro-Series or GoPro. With a lab verified lumen output of 2500, the light has a 60 minute burn time at full power – making it incredibly efficient as well as bright.
Easily expand with Flex-Connect
A Flex-Connect Single Tray, Grip and fitted case are included with the light. For those that want to expand an existing set, the light head is also available on its own (Item SL6712). Flex-Connect allows you to quickly and easily transform your camera set from compact to full-featured in just seconds by adding grips, Flex Arms, trays and more with just a “click!”
Powerful 2500 lumen LED light using the latest COB LED array technology.
Three brightness levels: 100%, 50% and 25%.
One button control for easy operation. One button to power light on/off and select brightness.
60 minute burn time at full power.
Constant brightness – Regulated circuitry so light won’t dim with battery power.
90 Color Rendering Index (CRI) that mimics natural daylight.
Easy to expand with Flex-Connect™ trays, grip and flex arms.
120° wide beam angle evenly illuminates the subject with no hot spots. 90° underwater.
Emergency mode emits blinking light or SOS signal to alert others of distress. Activated by holding down power button for 5 seconds from power off state.
Depth rated to 330 ft (100m).
Corrosion-proof metal light head for heat dispersion and durability.
Removable 25Wh 3400 mAh Li-Ion battery w/ charger and international plug adapters included.
Waterproof battery compartment protects internal electronics even if light accidentally floods.
Protective circuitry – The light and battery feature integrated protective circuits that cuts power in the unlikely event the light overheats or short circuits.
Safety pressure release valve – one-way waterproof valve releases battery compartment pressure in the unlikely event of battery malfunction.
|Body Material||Anodized aluminum light head with fiber-reinforced polycarbonate body|
|Light Source/Bulb Type||1 x COB LED array (COB – Chip On Board)|
|Brightness||2500 lumens (maintains 2500 lumens throughout burn time at full power)|
|Brightness Levels||Full power (100%), half power (50%), and quarter power (25%)|
|Buoyancy||Negative; -94 grams underwater|
|Button Control||Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle]|
|Light Modes||Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power|
|Color Rendering Index*||90|
|Beam Angle||120 degrees (90-degrees underwater)|
|Battery||Lithium Ion 7.4V, 3400 mAh, 25Wh (included)|
|Battery Charge Time||170 minutes|
|Run Time||60 minutes at full power/120 minutes at half power/240 minutes at quarter power|
|Depth||Tested to 200 feet/60 meters|
|Dimensions||4.8″ x 2.2″ x 3.8″ (12.2cm x 5.6cm x 9.7cm), head only|
|Weight||9oz (255g) head only without battery ; 12.9oz (365g) head with battery|
|Bulb Life||35,000 hours|
|O-ring||Dual NBR o-rings (lube included)|
*CRI is a measure of a light source’s ability to show object colors “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
Sea Dragon 2500 Underwater Photo/Video Light head
Flex-Connect Single Tray w/ standard ¼-20 mounting screw
25Wh Lithium Ion rechargeable battery
AC Power Adapter, charging tray, and international plug adapters
Adapter for GoPro cameras with acorn nut
Spare O-rings, O-ring lubricant, O-ring removal tool
Sea Dragon Case