Out of stock
Powerful 2000 lumen LED light. Latest COB LED array technology. True, lab-tested lumens and not “theoretical” lumens specified by most other manufacturers.
One button control for easy operation. One button to power light on/off and select brightness.
Three brightness levels 100%, 50% and 25%.
Hidden emergency signal mode. 1 sec blink interval and SOS Morse code. Push and hold power button for 4 seconds to activate.
60 minute run time at full power.
Constant brightness – Regulated circuitry so light won’t dim with battery power.
80 Color Rendering Index (CRI) that mimics natural daylight.
Easy to expand with Flex-Connect™ trays, grips, arms, cold-shoe, ball joint and Y-S adapters.
120° wide beam angle evenly illuminates the subject with no hot spots.
Depth tested to 330ft (100m) – Guaranteed.
Corrosion-proof metal light head for heat dispersion and durability.
Removable 25W Li-Ion battery w/ charger and international plug adapters included.
Waterproof battery compartment – even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics.
Protective circuitry – The light and battery feature integrated protective circuits that cuts power in the unlikely event the light overheats or short circuits.
Safety pressure release valve – one-way waterproof valve releases battery compartment pressure in the unlikely event of battery malfunction.
|Body Material||Anodized aluminum light head with fiber-reinforced polycarbonate body|
|Light Source/Bulb Type||1 x COB LED array (CREE CXA1816 P4 36V)|
|Brightness||2000 lumens (maintains 2000 lumens throughout burn time at full power)|
|Brightness Control/Light Modes||Full power (100%), half power (50%), quarter Power (25%)|
|Color Rendering Index||80|
|Beam Angle||120° on land / 90° underwater|
|Battery||Lithium Ion 7.4V, 3400 mAh, 25Wh (included)|
|Battery Charge Time||170 minutes|
|Run Time||60 minutes at full power, 120 min at half power or Auto, 240 min at quarter power|
|Depth||Tested to 330 feet/100 meters|
|Dimensions||8.5″ x 9.5″ x 2.3″ (22cm x 24cm x 6cm), fully assembled with light head, battery, grip and tray
5.1″ x 2.2″ x 4.1″ (13cm x 5.6cm x 10.4cm), head only
|Weight||13 ounces (370 grams) light head w/battery installed|
|Bulb Life||35,000 hours|
|O-ring||Dual silicone O-rings (lube included)|
|Buoyancy||Negative; -94 grams underwater|
*CRI is a measure of a light source’s ability to show object colors “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
Sea Dragon 2000F UW Photo-Video Light Head
25Wh Lithium Ion rechargeable battery
AC Power Adapter
Int’l plug adapters
O-ring removal tool